X2 Race Control 5

X2 Race Control – Marshalling

The Marshalling module in X2 Race Control gives you full control to provide warnings to drivers for dangerous situations by showing on-board and trackside flag signals.

X2 Race Control 33

On-board and trackside marshalling

Send on-board and trackside flagging information instantly to everyone at the same time with the X2 RaceLinks and X2 LED Panel.

  • Send all common flags to vehicles on the track, including green, yellow, red and finish
  • Flagging via integrated or external LED Bars or Dashboards
  • Replicate all Track, Sector and Personal Flags trackside
  • The X2 LED Panels are homologated by the FIA & FIM for Grade 2 circuits and lower grades
  • Select the panel that meets your needs: Grade 2, Grade 3 or Non-Graded Panels

 

New call-to-action

A powerful add-on to your marshalling operations. Provide extra warning to drivers for dangerous situations by showing flag signals on their dashboards and on the new MYLAPS X2 LED Panels along the circuit. With on-board marshalling drivers receive sector-based flag signals on integrated LED lights or through external displays via the X2 RaceLink Club and X2 RaceLink Pro. All common flag signals (green, red, yellow, safety car, slippery surface, etc.) are available. These marshalling solutions offer great benefits to circuits and Series/ Championships in on-track safety, in addition to defined cost savings from marshal number reduction and redeployment.

 

New call-to-action

 

X2 Race Control - Marshalling 13

Marshalling References

X2 Race Control - Marshalling 7

SuperGT

Cars are equipped with X2 RaceLink Pro which is used for live positioning info, and to relay instant live flags to on-board displays for on-board marshalling.

X2 Race Control - Marshalling 9

Tor Poznan

FIA Grade 3 Circuit that uses 15 Trackside X2 LED Panels (Grade 2) and on-board marshalling.

X2 Race Control - Marshalling 11

BTCC

Series that uses on-board marshalling across all British Touring Car Championships and support series including the Porsche Sprint Challenge GB.

X2 Race Control - Marshalling 12

FIA World RallyCross

Car racing series that uses on-board marshalling.

Setup

The Marshalling module in X2 Race Control gives you full control to provide warnings to drivers for dangerous situations by showing on-board and trackside flag signals.

Marshalling Solution Components

The beating heart of X2 Race Control. All components are connected to and controlled from this core device. Available in Club and Pro housing.

Software to improve your Race Control. This software comes in 3 versions:

  1.  X2 Race Control Setup to manage your X2 Link setup (free)
  2.  X2 Race Control Manager to manage your Race Control (yearly fee)
  3.  X2 Race Control Manager Pro to manage your Race Control in an X2 Pro environment (yearly fee)

The BaseLink sends out radio frequency signals, which are picked up by the X2 RaceLink antennas mounted on each vehicle. The BaseLink is installed at the start/finish line, on a position with a maximum line of sight, for instance on top of a finish arch. This will ensure an optimized wireless connection with the RaceLink installed on the vehicles.The BaseLink connects to the LoopBox, which also powers the BaseLink. The Ethernet port connection to the LoopBox ensures a high-quality signal.

Multi BaseLink setups

With a Multi BaseLink setup, you can cover the complete track, no matter what size, height difference, and terrain. Several X2 BaseLinks can be linked together and controlled by race control. Depending on the layout, environment, and location the number of X2 BaseLinks required may vary.

  • Full GPS tracking coverage
  • Live results updates at the complete track

X2 Multi BaseLink setup | MYLAPS

X2 Multi BaseLink and SDK 4.0

With the new X2 Server Firmware 4.0 and SDK 4.0 it is  also possible to create a GPS tracking feed in your own, custom-built software.

MYLAPS X2 BaseLink

Shows flag signals along the track. All common flags (green, red, yellow, safety car, oil slick, etc.) are available. The X2 LED Panels are homologated by the FIA & FIM for Grade 2 and Grade 3 circuits. MYLAPS light panels are available as Grade 2, Grade 3 and Non-Graded panels.

 

 

High-end controller for marshalls to manage flag signals on X2 LED Panels. Fully compliant with FIA regulations. The controller has a clear view on current, previous and upcoming flag status. Durable design with easy to control buttons.

  • Basic system component
  • Full experience
  • Optional component

In-Vehicle Solution Components

The Racelink Club is used for live tracking of all vehicles, speed measurement, and it has integrated LED panel for on-board flag signals for drivers

Enables racers, teams, broadcasters, and scrutineers to stream live 2-way data via RF over CAN Bus, like results, tire pressure, RPM, balance of performance, rev, cockpit temperature, battery status. Also allows live tracking of all vehicles.

The X2 LED Bar shows safety flags as communicated through RF by RaceControl. It is an add on to marshals flagging. The X2 LED Bar functions in combination with the X2 RaceLink Club or X2 RaceLink Pro.

  • Basic system component
  • Full experience
  • Flexible component

New call-to-action

Features

A full overview of all the features in the X2 Race Control Marshalling module.

 

Grade 2, Grade 3 and Non-Graded Light Panels

The main difference between the Grade 2, Grade 3 and Non-Graded light panels are FIA & FIM set requirements for minimum brightness levels, color coordinates and viewing angles for each grade. All of the MYLAPS light panels have outperformed the competition in regards to the minimum set requirements by the FIA & FIM. This means that MYLAPS light panels have a wider viewing angle, higher brightness levels and come with proven MYLAPS standards of reliability and robustness.

The flag signals on light panels can be managed by the high-end X2 LED Panel Controller. Fully compliant with FIA regulations. The controller has a clear view on current, previous and upcoming flag status. Durable design with easy to control buttons.

New call-to-action

X2 Race Control - Marshalling 4

Brochure

X2 Race Control 19

Download the free X2 Race Control brochure

Learn everything about MYLAPS X2 Race Control in this online brochure. Download your free copy today and find information about:

 

✔  The Race Control solution that suits you best
✔  How you can improve safety at your track
✔  Product specifications

X2 LED Panel

 

  • Highest LED resolution in the motorsport market
  • Horizontal viewing angle, from left and right side, up to 50° (industry standard is 40°)
  • Vertical viewing angle, from up and down, up to 20° (industry standard is 15°)
  • Individual panel background light sensitivity (Grade 2 & 3 only)
  • All race flags available, including 1 custom logo
  • Panels use an on-board light sensor to detect changes in ambient light
  • Rear repeater for instant confirmation of current panel status
  • Panels can be maintained and upgraded remotely
  • Part of a fully integrated MYLAPS race control solution
  • MYLAPS world-leading quality and durability
  • FIA Grade 2 and Grade 3 homologated
  • Also available as a Non-Graded panel

X2-LED-Panel-Slanted-SC

Case study

X2 Race Control - Marshalling 6

Wondering how X2 Race Control works in practice, and how it can enhance your circuit?

Read our blog post in which we take a closer look at the experience from Tor Poznan’s race control team, Poland, where a full X2 Race Control setup is being used on track.

Read Case study

Get flagging

Maintain complete control of your circuit with the marshalling module. Some of the features include:

  • On-board marshalling
  • Trackside marshalling with MYLAPS LED panels
  • Marshalling operations
  • Live GPS positioning
  • Individual vehicle tracking
  • Manage race session
  • Event logging & Basic reporting
  • Automatic logging of all system communication
X2 Race Control 50
X2 Link 29

Do more with X2 Race Control

  • Enhanced safety protocols for both participants and circuit personnel
  • Reduce costs, e.g. from improved allocation of circuit personnel during day-to-day operations
  • Lower liability risks with accurate, time-stamped recording of incidents, reduced ‘human factor’ errors
  • Compliance with regulatory requirements, e.g. to ensure future FIA/FIM Grading
  • Security of a one-stop Race Control solution with a trusted partner

 

New call-to-action

 

X2 Race Control 13

Be in control of your track

Want to take your Race Control to the next level? X2 Race Control can be used as stand-alone solution or can be integrated with your MYLAPS timing system.

Get in touch with us today for more information.

New call-to-action

X2 Race Control - Marshalling 1

References

paul-ricard-circuit-3 motogp-2 indi-speedway-2 rotterdam-marathon logo_giro_donne rb_uci_pumptrack_qualifier_logo_2020_fb-2